NAD C3050 LE (ESAURITO)


Amplificatore Integrato Ibrido

2.499,00


Colori disponibili : Graphite

8 Ingressi linea di cui 2 Dig.ottici, 2 Dig. Coax, 2 Analogico, 1 Phono MM, 1 HDMI eARC Uscita: 1 Uscita Pre Out/Sub1/Sub2, 1 IR in/out, 1 Trigger in/out, 1 Uscita Cuffia Connessione Bluetooth ADP4 con aptX
1 RS232 per controllo remoto, 2 ingressi per Moduli MDC2: BluOS-D

Possibilità gestione Speaker A Speaker B
Possibilità di controllo da Smartphone (opzionale) o Telecomando

  • Continuous output power into 8 ohms and 4 ohms
  • 100W (ref. 20 Hz-20 kHz at rated THD, both channels driven)
  • THD (20 Hz – 20 kHz)
  • <0.03% (250 mW to 100 W, 8 ohms and 4 ohms)
  • Signal-to-Noise Ratio
  • >95dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
  • Clipping power
  • >115 W (at 1 kHz 0.1 % THD)
  • IHF dynamic power
  • 8 ohms: 180 W
  • 4 ohms: 250W
  • 2 ohms: 300 W
  • Peak output current
  • >20A (in 1 ohm, 1 ms)
  • Frequency response
  • ±0.3 dB (20 Hz – 20 kHz)
  • Channel separation
  • >75dB (1 kHz)
  • >70dB (10 kHz)
  • Input sensitivity (for 100 W in 8 ohms)
  • 540 mV
    Digital: -6dBFS
  • Power consumption – at Auto Standby ON and Network Standby OFF
  • 0.5 W*
  • Power consumption – at Auto Standby ON and Network Standby ON
  • 2.0 W**
  • Power consumption – OFF mode (Power switched OFF)
  • 0.1 W
  • Frequency band
  • 2.402G- 2.480G
  • Gross dimensions (W x H x D) ****
  • 435 x 110 x 355mm
    17 1/4 x 4 3/8 x 14 inches
  • Net weight
  • 10 kg (22 lbs)
  • Shipping weight
  • 12.6 kg (27.8 lbs)

Ti potrebbe interessare…