Amplificatore Integrato Hi-End con DAC 192kHz/24bit – Potenza 80W x 2 su 8ohm / 150W x 2 su 4ohm – Fattore dismorzamento >300 – Connessione Bluetooth 5.0 – 2 ingressi di linea analogici – 3 ingressi digitali ottici e 2 coassiali – Ingresso Phono MM – Uscita pre out – 2 uscite cuffie (3.5mm e 6.3mm) – Connessione cuffie Bluetooth -Dimensioni: L470 x A90 x P262mm – Peso: 8kg
| PREAMPLIFIER: |
| Input impedance: 75 kOhms |
| Noise floor:< -130dB |
| THD+N: < 0.002% |
| Frequency response (-3dB): 1 – 150 kHz |
| Volume adjustment range: – 110dB to +15 dB |
| OUTPUT AMPLIFIER: |
| THD+N: < 0.005% |
| Output power (into 8 Ohms): 2 x 80W |
| Output power (into 4 Ohms): 2 x 150W |
| Damping factor (8 Ohms load): > 300 |
| Frequency response (-3dB): 1 – 150kHz |
| SNR (input shorted, ref 1W into 8 ohms, A-weighted): 102 dB |
| Gain: 25 dB |
| Protection: DC, overload, temperature |
| RIAA PHONO: |
| Pickup support: Moving Magnet |
| Gain: 40 dB @ 1kHz |
| Input impedance: 47 kOhms || 100pF |
| RIAA correction accuracy: +/-0.1dB, 25-20kHz |
| Subsonic filter: -3 dB @ 14 Hz |
| THD: < 0.001% |
| SNR: 83 dB (A-weighted) |
| Overload margin: 30dB @ 1kHz |
| HEADPHONE AMPLIFIER: |
| THD+N: < 0.001% |
| Load impedance single output in use: > 16 Ohms |
| Load impedance both outputs in use: > 32 Ohms |
| Max output power (into 16 Ohms load): 0.4W |
| Max output voltage swing: +/-8V peak |
| Output impedance: 10 Ohms |
| Protection: DC, overload |
| DIGITAL & STREAMING: |
| Optical input: PCM: 44.1kHz/16bit up to 192kHz/24bit |
| Coaxial input: PCM: 44.1kHz/16bit up to 192kHz/24bit |
| Bluetooth support: BT5.0, A2DP, SBC, AAC, aptX-HD |
| CONNECTIVITY: |
| Digital inputs: 2 coaxial, 3 optical |
| Analog inputs: 2 RCA |
| Analog preamplifier output: 1 RCA |
| Service port: 1 USB |
| 12V trigger: 1 input, 1 output |
| Phono MM: 1 RCA |
| Headphone outputs: 3.5mm jack + 6.35mm jack |
| Speaker outputs: 1 pair binding posts |
| WEIGHT & DIMENSIONS: |
| Weight: 8 kg – 17.6 lbs |
| Width: 470 mm – 18.5 inches |
| Depth: 262 mm – 10.3 inches |
| Height: 90 mm – 3.5 inches |
| VOLTAGE & POWER CONSUMPTION: |
| Mains input voltage: 100-240VAC, 50/60Hz, 3A |
| Idle (no load or signal): 30 W |
| Standby: < 0.5 W |
| OFF (main switch OFF): 0 W |
| *Specifications are subject to change without further notice |
