Finale a 8 canali 8x50w su 8 ohm
Colori disponibili : Black
4 Ingressi stereo separati, 4 Uscite loopOut, possibiltà di configurazione a Bus Possibilità di configurazione a ponte, 2x120w RMS 8 ohm
Possibilità montaggio rack
Key Features
Eight channels of clean, low distortion power set up in four stereo zone configuration
50W x 8 @ 8 Ohms; 60W x 8 @ 4 Ohms; 120W @ 8 Ohms in Bridge Mode
Universal voltage to accommodate marine or avionics installations
Compact 2U rack height with rack ears
Phoenix speaker connection blocks
Detachable power cable for easy service and upgrades
Indicator lamps for each zone that show protection status and amplifier clipping
<0.5W standby consumption
<0.03% THD; <0.04% IMD (SMPTE, CCIR)
>86dBA referenced to 1W
Overall Specifications
Continuous Output Power
8 Ohms
8 x 50W (ref. rated THD, 20Hz-20Hz, all channels driven)
4 Ohms
8 x 60W
8 Ohms Bridge Mode
120W
Rated THD (250mW to rated power, CCIF IMD, DIM 100)
<0.03% (ref. 20Hz-20kHz)
Clipping Power
>155W (ref. 1kHz, 8 Ohms, 0.1% THD)
Damping Factor
>150 (ref. 8 Ohms, 50Hz and 1kHz)
Input Sensitivity
1.1V (ref. rated power)
Voltage Gain
33dB
Frequency Response
20Hz-20kHz ±1dB
Signal/Noise Ratio, A-Weighted
>80dB (ref. 1W/8 Ohms)
>100dB (ref. 50W)
Miniumu Input Signal to Trigger (auto sense mode)
>20mV
Time to Automatic Standby (without signal at input sense mode)
10 minutes
Rated Power
600W (120V 60Hz, 230V 50Hz)
Idle Power
<26W
Standby Power
<0.5W
Weight & Dimensions
Gross Dimensions* (W x H x D)
483 x 105 x 323mm (19 1/16 x 4 3/16 x 12 3/4”)**
Net Weight
5.72kg (12.6lb)
Shipping Weight
7.1kg (15.65lb)
*Gross dimensions include feet, extended buttons and rear panel terminals.
**Non-metric measurements are approximate.
